Bluetooth Headphones Keep Turning Off: Causes and Fixes

Is your Bluetooth headphones keep turning off? Bluetooth headphones are one of the most exciting developments in the music industry. They allow us to listen to music without worrying about cables obstructing our view. However, there is a drawback: Bluetooth technology is not without flaws. 

If your wireless headphones stop working or suddenly turn off? It’s frustrating, right? Your wireless headphones may turn off for a variety of reasons. But worry no more, we will cover some causes and fixes in this article.

Bluetooth Headphones: How Do They Work?

Bluetooth Headphones: How Do They Work?

Bluetooth wireless technology has short-range transceivers, which are often low-cost. The technology communicates radio waves at specific frequency ranges across the air using transmitters and receivers.

Bluetooth headphones function in the same way that wired headphones do. Except that Bluetooth headphones send and receive audio signals over Bluetooth. The audio device and the Bluetooth headphones must be Bluetooth-enabled to accomplish this.

The devices should be in pairing to send and receive audio signals, which results in a piconet. This is essentially a network that connects devices wirelessly over Bluetooth.

We can listen to music on our Bluetooth devices using a simple technique. When a digital device transmits a signal to Bluetooth headphones. The signals are processed by a Digital to Analog Converter (DAC). Which converts the digital sound to analog.

The signals route to an amplifier, which raises the signal to a voltage level to produce the correct driver performance for the headphones. The drives then generate sound waves, which people hear.

Bluetooth Headphones Keep Turning Off: Cause and Fixes

Your Bluetooth headphones are probably one of your favorite ways to listen to music or stay connected while doing other things. But when those headphones keep cutting out and disconnecting, it’s no longer such a convenience. You’re now hands-on, trying to figure out what’s going on rather than hands-free.

The source of the constant Bluetooth headphones turning off could be the headset. The device you’re attempting to connect it to, or external interference. Fortunately, there are simple fixes for each culprit.

To resolve the problem, proceed through the troubleshooting steps.

#1 Battery Low

A rechargeable battery most likely powers your wireless headset. If the headset’s battery power is low, it may have trouble maintaining a stable connection. It results in frequent disconnections and might be the reason why your Bluetooth headphones keep turning off.

🛠️Fix: Charge your headset for at least 15 minutes before reconnecting it to the device. If you find yourself having to charge your headphones more frequently than when you first purchased them. The problem is that rechargeable batteries degrade over time.

#2 Distance

All Bluetooth headsets have a range and efficiency limitations. The radio waves used to link your Bluetooth headset to your device are not capable of traveling long distances. As a result, if you are active while wearing the headset or move too far away from the device. You may experience audio stutters and, eventually the reason why your Bluetooth headphones keep turning off. According to most wireless headset manufacturers, their products can stay connected for up to 30 feet.

🛠️Fix: If possible, try to stay close to your device or bring it with you. For example, you can keep your phone in your pocket. Also, be wary of obstacles, such as a wall, that may stand in your way.

#3 Headphone Quality

Another reason why your Bluetooth headphones keep turning off is the poor quality. A bad product will almost always produce bad results. A lower-quality wireless headset may not be able to maintain a stable connection all of the time. Making you deal with them inconvenient.

🛠️Fix: Don’t try to save money the next time you go shopping for a wireless headset. Even if you cannot afford the most expensive wireless headset. Reliable options are still available at reasonable prices. When shopping for Bluetooth devices, make sure to read the reviews thoroughly. 

#4 Headphone Is Damaged Or Dirty

Headsets, like all other devices, can sustain damage over time. It can also be the reason why Bluetooth headphones keep turning off.

🛠️Fix: You should clean your headset regularly. Otherwise, dust and other materials can accumulate and block the speaker over time. You should also not charge the headset unless necessary because the batteries can degrade and become weak.

It would be beneficial if you also took care of the headset when it was not in use. Rather than leaving it on the desk or in a drawer. Keep it somewhere safe. Avoid mishaps such as a headset falling out of your ears while you’re running. Or an outlet blowing a fuse while your headset is charging.

#5 The Device Is Not In Pairing Mode

The device you attempt to pair with your headset should be in pairing mode. Setting the device to pairing mode on smartphones and computers is as simple as turning on Bluetooth. You will only need to press the Bluetooth button in Settings.

🛠️Fix: When setting up a wireless connection, make sure you follow the exact instructions for your device. If you’ve previously paired the device with the headset. Then, it’s suddenly behaving strangely, disconnecting the connection. Unpair the headphone, restart the device, then try to pair it again.

#6 Power Saving Mode

A Bluetooth connection can quickly deplete a device’s battery. As a result, many devices disable Bluetooth functionality when they enter power-saving mode to avoid wasting battery power. Thus it can also be the reason why Bluetooth headphones keep turning off.

🛠️Fix: Charge your device or disable its power-saving mode before turning on Bluetooth. Some devices automatically activate the power-saving mode. Check that the airplane mode is turned off, as this can interfere with Bluetooth functionality.

#7 Device Compatibility

Your Bluetooth headphones keep turning off because it is incompatible with the device you attempt to connect. Your device may not even support Bluetooth. If it is substantially older than your newer wireless headphone.

🛠️Fix: The best way to avoid incompatible headphones and devices is to study the product specifications carefully before purchasing them. It is to ensure that any new purchases will function with your existing equipment.

#8 Software Glitches

Your device may be acting strangely for no apparent reason. Such as a software bug that affects the device’s connections, including Wi-Fi, mobile internet, and Bluetooth.

🛠️Fix:

  1. Turn on airplane mode to resolve this problem.
  2. Allow it to turn on for a few seconds before turning it off.
  3. Check to see if the connection stabilizes. If that doesn’t work, restart your device and re-check your connection.

To get rid of the bug, you can unpair and repair the device with the headset.

#9 Too Many Background Apps

Having multiple apps open and running in the background on your phone slows down performance and causes various issues. It may even confuse your headset and causes Bluetooth headphones keeps turning off.

🛠️Fix: Close all background apps and see if that resolves the problem.

#10 Contact Duplication

Your synced contact list frequently duplicates contacts when you answer a phone call. As a result, when the call is answered, the Bluetooth headset tends to distinguish between those multiple contacts. This could result in a dropped call or audio skipping. 

🛠️Fix: The simplest solution is to delete the duplicate contacts from your phone.

#11 Interference

Bluetooth technology uses radio frequency (RF) to communicate wirelessly. Because RF is susceptible to interference, your Bluetooth headphones may frequently disconnect or skip. Many other devices, such as Wi-Fi routers, microwaves, and electronic appliances, might create interference. Since they use the same frequency bands as Bluetooth.

🛠️Fix: Try to avoid being in an area cluttered with wirelessly connecting devices as much as possible. Keep obstructions away from the audio source and Bluetooth headphones.

#12 Outdated Software

The frequent disconnections could be caused by out-of-date software. Which can automatically disable some features, such as Bluetooth.

🛠️Fix:

  1. Check your device’s Settings for any recent updates.
  2. If available, install the update.
  3. Set up your device for automatic updates, so you don’t miss out on new features or bug fixes that come with update patches.

#13 Wi-Fi Interference

Bluetooth and Wi-Fi communications both produce radio waves. They can interfere with one another since they function similarly. Some Wi-Fi routers, especially older ones, can interfere with your headset’s Bluetooth connection.

🛠️Fix: To improve the connection, turn off the router or move the headset further away from it.

How to Reset Bluetooth Headphones: Basic Reset

In most cases, resetting wireless headphones is relatively uniform across brands. However, you should pay attention to the control options on your headphones. So, if you have volume controls, you may need to perform a combination button press to resolve the issue.

To begin, ensure that your headset is turned off. Then select one of the following options.

  • If you only have the power button. You must usually press and hold it for approximately 10 seconds to reset it.
  • However, if your device has a volume and power button. Press and hold both the power and volume +/- buttons for up to 10 seconds
  • If you have a call, volume, and power button in addition to a power button. You may need to perform power and call. Or call or volume button combination by pressing them for up to 10 seconds.
  • If your device has a play/pause button. You must also complete the previous step.

How to Improve Bluetooth Signal

The drawbacks caused by poor signal strength for Bluetooth devices have prompted Bluetooth developers. And other individual organizations to look for ways to boost signal strength to ensure proper connection.

The signal strength is determined by the Bluetooth range and the number of devices connected to a single phone or PC. There are various methods for increasing Bluetooth signal strength. Some of the ways are as follows:

🎧Bluetooth Router

A Bluetooth router is a tool that can help increase the Bluetooth signal from your host device to other devices. A Bluetooth router can typically double its range to increase Bluetooth signal strength. 

The Bluetooth router can increase the number of devices that a host device can service from 7 to 14. This is helpful since it enables you to listen to audio without worrying about signal strength buffering.

🎧Update the Firmware

Bluetooth users must utilize the most up-to-date software and hardware devices. These frequent and ongoing updates are critical to preventing short-circuiting. And, as a result, ensuring that the Bluetooth version in use is up to current with the latest improvements.

You may manually upgrade the firmware on your motherboard by going to the manufacturer’s website. Look for your model, which can be installed to serve you better. Or by simply updating the drivers to fit your demands.

🎧Make Use of a Long-Range Transmitter

A Bluetooth transmitter/receiver with a great range allows you to stream audio from practically any device to your sound system or speakers. Including your cell phone, tablet, laptop, or desktop.

This device extends the Bluetooth range from the host device to approximately 220 feet. However, it should be noted that Wi-Fi routers and physical obstructions may restrict the coverage provided by Bluetooth long-range routers.

Unfortunately, the signal strength decreases as the distance between the transmitter and the receiver increases. As a result, selecting a model that boosts signal strength while also expanding range is always a good idea.

🎧Use a Bluetooth Repeater

Another method for extending range is to incorporate repeaters into your area. Repeaters gather up messages and repeat them within a specific geographic area. This expands the network’s capacity without requiring additional complex engineering improvements to the initial device. Furthermore, this aids in enhancing Bluetooth signals within a particular area.

Tips When Buying a New Bluetooth Headphones

There is no doubt that Bluetooth headphones have the advantage of being wireless. It allows you to carry them with you wherever you go. The primary benefit of going wireless is, of course, less fumbling with connections and cords.

When looking for the ideal Bluetooth headset. Keep in mind that there is no such thing as a “perfect” earpiece. It’s a matter of various experiences for different people, much like most electrical things. The idea behind selecting the best over-the-ear headphones that match your demands is first to figure out what you want.

When shopping for new Bluetooth headphones, consider the following:

✔Usage

If you use your headphones in a noisy office to talk on the phone with others. You’ll probably want one with noise cancellation and wind reduction functions. And you’ll almost certainly need a headset and headphones with a microphone attached to the front.

If you mostly listen to music, Bluetooth headphones with superior sound quality are a good investment. Look for one with controls for music playback. A no-hook version is ideal if you often switch headphones on and off during the day.

✔Battery Life

Bluetooth headphones require charging, so inquire about battery life before purchasing. In general, larger headphones have longer battery life. However, smaller headphones look better and are handier. The average pair of headphones may work for 4-5 hours on a single charge. While standby duration ranges from less than a week to more than two weeks.

✔Bluetooth Versions

There are numerous Bluetooth versions, and you must ensure that the device you purchase is compatible with the correct one.

Furthermore, not all versions have the same characteristics. So, if you’re buying headphones, make sure they’ll function with your existing gadgets. You don’t want to go home just to discover that your headset isn’t working with your laptop.

There are five Bluetooth versions you should be aware of. Each is slightly different from the last. Nonetheless, there are a few similarities. Each may silence a call, voice dial, and redial the last number dialed.

  • Bluetooth version 1.1: The first version had a range of 10 meters. It lacks NFC, low battery consumption, and strong security.
  • Bluetooth version 1.2: Bluetooth 1.2 has a 10-meter range, but it is more advanced. It is secure and immune to radio frequency interference.
  • Bluetooth version 2.0: The next version has a range of 100 meters. It boasts high transmission speeds, low battery consumption, NFC support, and the advantages described above.
  • Bluetooth version 3.0: Bluetooth 3.0 includes all of the same functionality as Bluetooth 2.0. Plus an improved pairing feature that eliminates the requirement for a pin.
  • Bluetooth version 4.0: Bluetooth 4.0 adds Bluetooth low energy to the earlier features. As you may have observed, the most recent versions are all backward compatible. They are simply an improved version. So, as long as you’re only using the primary feature, there’s nothing to be concerned about.
  • Bluetooth version 5.0: Bluetooth 5.0 is the most recent and widely utilized version in modern devices. This model offers an outdoor range of up to 240 meters with a direct line of sight. Bluetooth 5.0 can transport more data faster and with less energy consumption than previous generations.

✔The Sound Quality

It is essential to consider how your music and movies sound. You know what’s good and terrible for your hearing. But if you hear others claim that a specific pair of headphones sound bad or excellent. It usually means precisely that. Some headphones sound horrible due to poor design or fit, whether Bluetooth or wired.

Don’t go into this expecting Bluetooth to provide the same level of fidelity as wired headphones. The audio processing components on high-quality Bluetooth models can be extremely powerful. But the source data from your phone over Bluetooth isn’t good enough to take advantage of the superior technology.

✔Comfort

Buying Bluetooth headphones without considering comfort can be a costly decision. Some headphones are held in place by a head strap. While a clip around the ear has others. Some earbud versions include interchangeable speaker cushions of various forms. It allows customers to select the most comfortable one for them.

Preferences in this area are pretty subjective. Some people complain of earaches after wearing headphones for long hours. While others are uncomfortable with earbuds that hook over their ears. If possible, try on the product in the store to ensure that it fits well in your ear.

✔Range

If you’re someone who wanders around without their phones. You’ll need a headset with a good range. Most Bluetooth headphones use Class 2 Bluetooth. Which ranges up to 33 feet before the sound quality degrades. There are, however, a few Class 1 Bluetooth headsets with ranges of up to 300 feet.

Frequently Asked Questions

What Exactly Is Bluetooth?

Bluetooth is a wireless technology that uses UHT radio waves to communicate data across short distances between electronic devices. The usual range is up to 33 feet (10 meters), while Bluetooth 5.0 can reach 100 feet (40m). Many gadgets use it, including cell phones, personal computers (primarily laptops), televisions, automobile radios, speaker systems, and headphones.

Is It Safe to Use Bluetooth Headphones?

Many individuals are concerned about the health impacts of Bluetooth headphones. This is a legitimate issue because Bluetooth headphones are worn over your head. And maybe worn around your neck when not in use. Bluetooth headphones operate on the same principles as mobile phones, Wi-Fi devices, and other wireless gadgets that communicate data via radio waves.

As a result, these gadgets generate electromagnetic radio waves. Which the International Agency for Research on Cancer (IARC) believes may be carcinogenic. However, as of 2019, there have been no instances of people suffering from health problems utilizing Bluetooth technology.

Can I Use Bluetooth Without Wi-Fi?

Yes, you can use Bluetooth without a Wi-Fi connection. Bluetooth does not necessitate the establishment of any wireless connection. While Wi-Fi is valuable because of the range and connectivity. Bluetooth proves helpful when you’re outside.

How Can I Make My Bluetooth Private?

To set your Bluetooth into private, follow these steps:

  1. Select Settings from the menu. 
  2. Tap the Bluetooth button. 
  3. Toggle the switch next to “Bluetooth” to enable or disable the feature. 
  4. Turn Bluetooth visibility on or off by tapping the icon next to “Open detection.”

How Do I Secure My Bluetooth?

You can improve the security of your Bluetooth connection by doing the following:

  • When you’re not using Bluetooth, turn it off.
  • Configure your Bluetooth to be undiscoverable.
  • Install system updates and fixes as soon as they become available.
  • Be cautious about which devices you pair with.

Final Thoughts

Bluetooth technology has undoubtedly propelled us to new heights. However, like all other forms of modern technology. It doesn’t come without flaws. However, a few connectivity and audio issues should not be a deal-breaker. Simply understanding how these devices run. And how to handle common problems should allow you to resolve these issues fast.

Were you able to resolve some of your audio problems using our solutions? If you have any questions or want to offer your tips, please leave them in the comments section below.

Leave a Comment