Speakers belong on the wall, away from traffic and obstacles. Mount heavy speakers on the wall will stay longer than those on the ground or the speaker stand. Wall mount speakers save on floor space and improve the general house appearance.
Mount heavy speakers on the wall have eliminated all reflections and obstacles that reduce the output experience. This article has a straightforward procedure explaining how to mount heavy speakers on the wall. You will also get factors you should consider while mounting speakers on the wall.
How To Mount Heavy Speakers On The Wall With a Drill
Tools and Equipment
– Stud finder
– Electric drill
– Wire stripper
– Cutter
– Speaker mounts
– Screws and screwdrivers
Step 1: Select the Appropriate Speaker Mounts
Match your speakers with the correct mounts. Some speakers are not mountable, so you must consider modifying them. Mounting brackets must match with holes or slots. Remember, you are mounting heavy speakers that require strong mounts and frames.
You can choose wall mounts that can rotate, turn or tilt, but such mounts are not the best for heavy speakers.
Step 2: Speaker Location
It is important you look for the best place in your room to mount the speakers. Make sure you mount on the appropriate height and direction. It should be free from furniture and other obstacles. Do not place the speakers close to pictures and other delicate stuff. This is because the vibrations can make them fall.
The speaker should be three feet from a corner to avoid sound concentration, and it should be off the window and doors. Sound vibrations can weaken the window panes and other junctions. Mount heavy speakers on the wall at the same height for both front and rear speakers. Doing so will help to balance the sound frequency.
Moreover, considering the length of the speaker cable, they should not be too far. However, you can buy extension cables for speakers. Measure the cable length and add about 20% for emergency connections.
Step 3: Mount the Brackets and Speaker Mounts
Some speakers come with a mounting kit that includes brackets. Use a stud finder to identify the electric pipes and other things behind the wall. Hold the brackets against the wall and use a pencil to mark the mounting holes. Put down the brackets and use an electric drill to make pilot holes. Make sure the holes are clean.
Then attach the brackets using the mounting screws or bolts. Ensure you match the size of the holes with the anchors. Screw the anchors until they firmly hold the bracket on the wall. Repeat this step three with other brackets in your room.
Step 4: Attach the Speakers On the Brackets
Place the speakers on the mounting brackets and ensure it clicks in position. Most speakers have female and male threaded holes which are supposed to lock on each other. Furthermore, you can add a safety strap to secure your speakers from external force. Turn and tilt the speaker to face your desired direction.
Attach the speaker cables and test them on your sound system. You can also adjust the direction while testing.
How To Mount Speakers On the Wall With Alien Tapes
An alien tape is a double-sided tape that can also help to mount speakers on the wall. However, such tapes are best for medium weight speakers because they do not have enough adhesive force to hold heavy speakers on the wall. Always stick the tape on a smooth surface like glass and wood, including ceramic. Use the following steps to mount speakers on the wall with alien tape.
Step one: get the perfect location on the wall to mount your speaker. Then clean the area and give it time to dry. Soak the piece of cloth in alcohol and wipe the mounting surface. Use a scraper to make the surface smooth.
Step two: attach the alien tape to the cleaned surface. You must match its length with the length of your speaker. Attach several strips if your speaker is somehow more prominent.
Step three: carefully place the speaker over the attached alien tape on the wall. Press the speaker over the tape until it is firmly held up. Repeat the same procedure for other speakers in the room.
How to Mount Speakers On the Wall With Picture Hooks
Picture hooks have a sticky adhesive surface on the back. You can take advantage of such force and use it to mount speakers on the wall. Unlike the alien tapes, picture hooks have various weight limits.
You are advised to choose a hook that can hold double your speakers’ weight. For example, if your speaker weighs 20 pounds, use a picture hook that holds 40 pounds. Picture hooks will reduce the holes on your wall, and they are easy to remove without any repairs. Here is the procedure for mounting speakers with picture hooks.
Step one: Decide on the best location you want to mount your speakers. Then smoothen the surface and clean it using alcohol and a sponge or piece of cloth. The picture hook will stick tightly on a clean surface and ensure the surface is also dry.
Step two: peel off the cover from the adhesive backing of your picture hook and carefully stick it on the cleaned spot. Use force to hold it firmly on the wall, then hook the speakers using the pre-drilled holes. Use the same steps for other speakers.
How To Mount Speakers On The Wall With Command Hooks
Command hooks work the same way as picture hooks, but command hooks can hold more weight hence can mount heavy speakers. They also have a sticky surface at the back that adheres to the wall. Consider using bigger command hooks to hold holiday decorations and other heavy stuff.
Stick the hook on smooth surfaces like wood and glass, and it will come off clean when you want to change the position. Use the following steps to mount speakers using command hooks.
Step one: take an appropriate position and clean the surface using ethanol or alcohol. And wipe the surface until it is dry and smooth.
Step two: carefully remove the plastic wrap from the sticky side of the command hook and attach it to the wall. Hold up the hook until it is hard on the wall.
Step three: now mount the speaker on the command hook using the pre-drilled holes on the speakers.
Conclusion
It is challenging to mount heavy speakers on the wall, but you can use the above procedure. Wall brackets must be strong enough to hold the speaker’s extra weight. Make sure you use a stud finder when mounting on a drywall. Do not mount the speakers in the corner or close to the ceiling.
However, you can use alien tapes, picture hooks or command hooks to mount speakers. These methods are perfect for lightweight speakers. It is the best way to avoid holes on your wall, and you can easily change the position but still have a clean wall. Learn here how to connect speakers on Bluetooth.